NAHLY Micro Ohmmeter 回路電阻測試儀
產品簡介
回路電阻測量是電氣測試的重要內容,根據《人民電力行業標準》DL/T845.4-2004的標準,參照《電阻測量裝置通用技術條件第4部分:回路電阻測試儀》的要求。本公司研制了全新NAHLY回路電阻測試儀,可方便地進行高低壓開關的主觸頭接觸電阻值、高低壓電纜線路的直流電阻值等純阻性試品的測量。
本產品使用了高精度、高穩定度的直流恒流源,可提供固定直流電流輸出,克服了傳統回路電阻測量儀需調節電流輸出的缺點;本產品采用了寬溫帶背光的大屏幕圖形液晶顯示器,而不是傳統的數碼管顯示方式,可直觀的顯示漢字,使得儀器操作顯得更加方便、簡潔;本產品使用了精密儀用運算放大器和高精度A/D轉換器,結合高性能十六位單片機,確保了該產品的測試準確度;本產品還設計了實時日歷時鐘、數據存儲、打印以及保護等功能,使得該產品功能更加完備,更高。
產品別名
回路電阻測試儀、接觸電阻測試儀、開關回路電阻測試儀、接觸回路電阻測試儀、接觸(回路)電阻測試儀
產品特性
1.大電流:采用新電源技術,能長時間連續輸出大電流,克服了脈沖式電源瞬間電流的弊端,可以有效的擊穿開關觸頭氧化膜,得到良好的測試結果。
2.抗干擾能力強:在嚴重干擾條件下,液晶屏后一位數據能穩定在±1個字范圍內,讀數穩定,重復性好。
3.使用壽命長:全部采用高精度電阻,有效的消除環境溫度對測量結果的影響,同時接插件的使用增強了抗振性能。
4.攜帶方便:體積小、重量輕。
產品參數
項 目 |
NAHLY-100A |
NAHLY-200A |
NAHLY-100B |
NAHLY-200B |
NAHLY-300A |
NAHLY-600A |
|||||||
測試電流 |
50A,100A |
100A,200A |
50A,100A |
100A,200A |
100A,200A,300A |
100A,200A,300A,600A |
|||||||
測量范圍 |
50A |
0~2000μΩ |
100A |
0~2000μΩ |
50A |
0~4000μΩ |
100A |
0~2000μΩ |
100A |
0~50mΩ |
100A |
0~50mΩ |
|
100A |
0~2000μΩ |
200A |
0~2000μΩ |
100A |
0~2000μΩ |
200A |
0~2000μΩ |
200A |
0~25mΩ |
200A |
0~25mΩ |
||
|
|
|
|
|
|
|
|
300A |
0~15mΩ |
300A |
0~15mΩ |
||
|
|
|
|
|
|
|
|
|
|
600A |
0~8mΩ |
||
顯示方式 |
3位半數字LCD顯示器 |
中英文液晶顯示屏 |
|||||||||||
分 辨 率 |
0.1μΩ |
0.01μΩ |
0.1μΩ |
||||||||||
存儲數據 |
無 |
可以存儲80組測試數據 |
- |
||||||||||
計時功能 |
無 |
帶計時功能 |
- |
||||||||||
電流顯示 |
不能顯示輸出電流大小 |
可以顯示實際輸出電流值 |
- |
||||||||||
打印功能 |
無 |
帶打印功能 |
- |
||||||||||
USB接口 |
無 |
帶USB控制端口 |
- |
||||||||||
外接PC |
無 |
能將測試數據直接導入到PC電腦進行分析 |
- |
||||||||||
測試精度 |
≤0.5% |
||||||||||||
功 率 |
- |
3000W |
6000W |
||||||||||
供電電壓 |
AC220×(1±10%)V;50×(1±5%)Hz |
||||||||||||
使用溫度 |
0℃ - 45℃(無凝露) |
||||||||||||
相對濕度 |
≤90%RH |
||||||||||||
海拔高度 |
小于1000米 |
||||||||||||
外形尺寸 |
290mm×260mm ×215mm |
360mm×290mm ×245mm |
330mm×280mm ×215mm |
330mm×280mm ×290mm |
- |
- |
|||||||
重 量 |
5.8kg |
9.5kg |
7.7kg |
8.9kg |
- |
- |
Product introduction
Used for a variety of high voltage circuit breakers (referred to as switch) main contact contact resistance measurements, you can also test the high voltage cable lines, busbars, weld and any low resistance non-inductive electrical resistance values, etc.
Accordance with the latest standards "JJG1052-2009 loop resistance test procedures" GB50150-91 and DL/T596-1996 the relevant regulations, can be a long stable output of not less than 100A large current, the instrument can not be avoided continuous work and thus can not effectively breakdown "oxide film" of the state. Using the new power and precision measurement and control circuits combined, making the measurement data with high accuracy and good reproducibility.
Also called name
Loop resistance tester, contact resistance tester, switch loop resistance tester, the contact loop resistance tester, touch (loop) resistance tester
The Characteristics of the products
1. large electric current: Using the latest Power technology to a long continuous output high current pulsed power to overcome the drawbacks of the instantaneous current can effectively switch contacts oxide film breakdown, get good test results.
2. anti-interference ability: In severe interference conditions, the LCD screen can be stabilized at last a data ± 1 digit range, the reading is stable and repeatable.
4. long life: all precision resistors, the effective elimination of ambient temperature on measurement results, while enhancing the use of military connectors vibration resistance.
5. Easy to carry: small size, light weight.
The parameters of the products
ITEM |
NAHLY-100A |
NAHLY-200A |
NAHLY-100B |
NAHLY-200B |
||||
Test current |
50A,100A |
100A,200A |
50A,100A |
100A,200A |
||||
Measure range |
50A |
0~2000μΩ |
100A |
0~2000μΩ |
50A |
0~4000μΩ |
100A |
0~2000μΩ |
100A |
0~2000μΩ |
200A |
0~2000μΩ |
100A |
0~2000μΩ |
200A |
0~2000μΩ |
|
Display mode |
3 and half LCD display |
LCD Display |
||||||
resolution |
0.1μΩ |
0.01μΩ |
||||||
Store data |
no |
Can store 80 group test data |
||||||
Time function |
no |
With timing function |
||||||
Current display |
Can't display the size of output current |
Can display real output current value |
||||||
Print function |
no |
With print function |
||||||
USB interface |
no |
with USB interface |
||||||
External connection PC |
no |
Can download the tested data to PC for analysis |
||||||
Precision |
≤0.5% |
|||||||
Power supply |
AC220×(1±10%)V;50×(1±5%)Hz |
|||||||
Operation temp |
0℃ - 45℃(no condensing) |
|||||||
Relative humidity |
≤ 90%RH |
|||||||
Altitude |
≤ 1000m |
|||||||
Out Dimension |
290×260×215mm |
360×290×245mm |
330×280×215mm |
330×280×290mm |
||||
Weight |
5.8kg |
9.5kg |
7.7kg |
8.9kg |
其他推薦產品
首頁| 關于我們| 聯系我們| 友情鏈接| 廣告服務| 會員服務| 付款方式| 意見反饋| 法律聲明| 服務條款
回路電阻測量是電氣測試的重要內容,根據《人民電力行業標準》DL/T845.4-2004的標準,參照《電阻測量裝置通用技術條件第4部分:回路電阻測試儀》的要求。本公司研制了全新NAHLY回路電阻測試儀,可方便地進行高低壓開關的主觸頭接觸電阻值、高低壓電纜線路的直流電阻值等純阻性試品的測量。
本產品使用了高精度、高穩定度的直流恒流源,可提供固定直流電流輸出,克服了傳統回路電阻測量儀需調節電流輸出的缺點;本產品采用了寬溫帶背光的大屏幕圖形液晶顯示器,而不是傳統的數碼管顯示方式,可直觀的顯示漢字,使得儀器操作顯得更加方便、簡潔;本產品使用了精密儀用運算放大器和高精度A/D轉換器,結合高性能十六位單片機,確保了該產品的測試準確度;本產品還設計了實時日歷時鐘、數據存儲、打印以及保護等功能,使得該產品功能更加完備,更高。